Are you curious about how to use a Brother PE535 embroidery machine? This beginner-friendly model is perfect for anyone who wants to start embroidering.
This article will cover the basics of using the machine, from threading the needle to stitching your design. We will also show you how to create a basic pattern and edit it on the machine.
So, whether you are just getting started with embroidery or want to learn more about this particular model, read on for instructions and tips!
How to setup Brother PE535 Embroidery Machine
Step by Step Guide
1. thread the needle
2. stitch your design
3. create a basic pattern
4. edit it on the machine
Now that you know how to use the brother pe535 embroidery machine try experimenting with different stitches and patterns! You can even download embroidery designs from the internet and transfer them to your machine using a USB drive. Have fun!
How to use the brother pe535 embroidery machine?
Thread the needle
First, you will need to thread the needle on your machine. To do this, start by raising the presser foot. Then, take your thread and guide it through the needle from back to front.
Once the thread is through the needle, pull it towards the back of the machine until there is a small loop. Take the thread from the spool, pass it under the loop, and then pull it through.
You will need to take the thread and pass it through the tension discs. Hold the thread with your left hand and turn the tension knob to the right with your right hand.
As you turn the tension knob, the thread should start to appear on the other side. Once the thread is through the tension discs, you can release the tension knob and continue holding the thread with your left hand.
Now that the needle is threaded, you must prepare your fabric. Start by placing the fabric under the presser foot with the wrong side facing up. Then, lower the press-era foot lever to secure the fabric in place.
Now you are ready to start sewing! Begin by slowly pressing down on the foot control to start the needle moving.
Guide the fabric under the presser foot with your hands as the needle starts moving. Continue holding onto the fabric until it is fully fed under the presser foot.
Stitch your design
By holding the fabric taut and pressing down on the foot control. To end the stitch, release the foot control and wait for the needle to stop moving.
To remove your fabric from the machine, raise the presser foot lever and carefully pull the fabric to the back of the machine. Then, cut the thread using the built-in cutter.
Create a basic pattern
To create a basic pattern, start by drawing your design on paper. Then, use a tracing wheel to transfer the design onto the interfacing.
Cut out the interfacing
Leaving a 1/4″ seam allowance around the outside of the design. Next, position the interfacing on the wrong side of the fabric and pin it in place.
To embroider the design, thread the needle and bobbin according to the manufacturer’s instructions. Then, position the fabric under the needle and lower the presser foot.
Once the needle is in position, start the machine and guide the fabric as it stitches. When the design is complete, raise the presser foot and cut the thread.
To remove the hoop from the fabric, first, loosen the screws. Then, carefully pull the fabric to the back of the machine. Finally, cut the thread using the cutting blade on the machine.
You can create your designs now that you know how to use the Brother PE535 embroidery machine! Experiment with different fabrics and threads to see what looks best. With a bit of practice, you’ll be an expert at embroidering!
The Brother PE535 is an excellent machine for those who want to get into embroidery. It’s easy to use and comes with everything you need to get started. With a bit of practice, you’ll be able to create beautiful designs that will impress your friends and family. Thanks for reading!